OS 160 setup question

[Dwayne & Nancy Brown]

One suggestion from George Aldrich a long time ago was to put a filter in
line just before the needle valve to eliminate bubbles.  Dwayne
----- Original Message ----- 
From: "Fletcher, Richard" <Richard.Fletcher at gs.com>
To: <discussion at nsrca.org>
Sent: Monday, September 13, 2004 2:48 PM
Subject: RE: OS 160 setup question


> Hi Karl,
>
>     I am using a Perry pump and a 20 oz tank mounted on the CG. I have
been
> careful to not run it lean but I think I will install a hopper tank so
that
> I never get a lean run due to air bubbles.
>
>
>
> Thanks, Rich
>
>
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.