O.S. motor info

[Ed Alt]

Just give him enough lead time for the Mueller's header John.  Took almost
over 3 weeks for me to receive mine, so plan ahead.
Ed
----- Original Message ----- 
From: "Mark Hunt" <flyintexan at houston.rr.com>
To: <discussion at nsrca.org>
Sent: Friday, September 10, 2004 12:40 AM
Subject: Re: O.S. motor info


> karl mueller....the best.
>
> ----- Original Message ----- 
> From: "John Pavlick" <jpavlick at idseng.com>
> To: <discussion at nsrca.org>
> Sent: Thursday, September 09, 2004 11:34 PM
> Subject: O.S. motor info
>
>
> > Thanks everybody for all of the O.S. motor info. Being a member of the
> > Harley Davidson (can I use that without being sued for trademark
> > infringement?) school of alternative thinking (bigger is better), I'm
> going
> > to try an O.S. 1.60. They're readily available and relatively
inexpensive
> so
> > that makes it easy. I have no problem with completely disassembling the
> > motor to install the pressure fitting (drill through the backplate screw
> > boss) and bearing so this should work out fine. I just need to find a
good
> > header to fit the Focus without making a mess of the cowl and tunnel.
> >
> >
> > John Pavlick
> > http://www.idseng.com
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
>
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.