Banding Headers

[Wayne Galligan]

BOB..................................................... go flying!!!!!

WG


----- Original Message ----- 
From: <rcaerobob at cox.net>
To: <discussion at nsrca.org>
Sent: Tuesday, October 19, 2004 3:03 PM
Subject: Re: RE: Banding Headers


> That's IT, DEAN!!!
>
> The "Silver Canadian Mueller Header", exhibits seasonal migration from the
northern reaches to various places south.  The Header has been known to
decapitate itself while airborne, separating it's head from it's body,
usually during stressful gatherings of humans operating remote-controlled
airplanes.  These separations appear to be random, and follow no known
migratory pattern.
>
> Some headers' pieces have been found, and attempts to revive them, for the
most part, have failed because humans do not fully understand the pathology
and anatomy of the Canadian Mueller Header.
>
> It is a strange phenomenon;  the Header "breeds" up North in Canada, yet
Dies in the southern reaches of North America.  How they reproduce seems to
be linked to an online payment service.....but it is a mystery.
>
> Bob
> >
> > From: "Dean Pappas" <d.pappas at kodeos.com>
> > Date: 2004/10/19 Tue PM 03:45:36 EDT
> > To: <discussion at nsrca.org>
> > Subject: RE: Banding Headers
> >
> > You see, Nat, they want to study the migratory patterns of the headers.
That's why they band them.
> > Tongue firmly in cheek,
> >     Dean
> >
> >
> > Dean Pappas
> > Sr. Design Engineer
> > Kodeos Communications
> > 111 Corporate Blvd.
> > South Plainfield, N.J. 07080
> > (908) 222-7817 phone
> > (908) 222-2392 fax
> > d.pappas at kodeos.com
> >
> > -----Original Message-----
> > From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Nat Penton
> > Sent: Tuesday, October 19, 2004 3:40 PM
> > To: discussion at nsrca.org
> > Subject: Re: Banding Headers
> >
> >
> > Banding Headers ??? Nothing wrong with my vision or spelling.
> > Don I don't think I can give Bob an answer he would like, LOL, besides
HE doesent need the vice.
> >
> > ----- Original Message ----- 
> > From: Nat  <mailto:natpenton at centurytel.net> Penton
> > To: discussion at nsrca.org
> > Sent: Tuesday, October 19, 2004 11:18 AM
> > Subject: Banding Headers
> >
> > The headers are made out of very soft alum. I have had 100% success
bolting the header to a peice of hard 5/32 alum (highway sign), placing the
sign in the vice, heating with the monocote gun in the specific area I want
the bend and using a piece of dowell for leverage (whew).
> >
> >
> >
>
> Bob Pastorello, El Reno, OK, USA
> rcaerobob at cox.net
> www.rcaerobats.net
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.