Trying to find the right servo

[Del Rykert]

Hard to see the read the data though.
    
    del

  ----- Original Message ----- 
  From: David Wartel 
  To: discussion at nsrca.org 
  Sent: Sunday, October 17, 2004 10:23 AM
  Subject: Re: Trying to find the right servo


  You can DYS right here!

  http://www.radiosouthrc.com/JRservochart.htm
    ----- Original Message ----- 
    From: Daniel J. Hamlett 
    To: discussion at nsrca.org 
    Sent: Sunday, October 17, 2004 9:42 AM
    Subject: Trying to find the right servo


    I am trying to find a servo made by JR that fit into these requirements.  Can anyone assist me in my serch.

    Torque 65oz" or up @ 4.8volt
    Size 1.4 x .8 x .5 or as close as possable
    Digital would be prefered.

    I am going to be putting them in the horizontal stab of a Compisite ARF Revolution Pro.    So they do need to be small.

    Thank you for all your help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041017/1f23cfd6/attachment.html