Practice tools

[Evan H. Dygert]

GWS.

On Thu, 7 Oct 2004 05:44:36 -0700
  "Wade Akle" <wbakle at charter.net> wrote:
>Rick,
>Who makes the Formosa?
>Wade
>
>----- Original Message ----- From: "rickwallace45" 
><rickwallace45 at hotmail.com>
>To: <discussion at nsrca.org>
>Sent: Wednesday, October 06, 2004 8:31 PM
>Subject: RE: Practice tools
>
>
>Anthony -
>I've flown a Shock Flier briefly and it's fun...
>But (after a dozen or so flights) the Formosa w/ a Eflite 
>370 brushless is
>the closest thing to a foam pattern plane I've seen or 
>flown. Certainly no
>replacement for a Focus or Hyde Away or ..., but way 
>better than a shock
>flier I think.
>
>Haven't flown Real Flight G2, but G1 is stretched to 
>allow a pilot to work
>individual maneuvers - I learned initial slow roll inputs 
>that way - but
>lines (horizontal and vertical) are completely 
>impossible.
>
>Come down this weekend and we can play w/ the foamies!
>
>-Rick
>
>
>-----Original Message-----
>From: discussion-request at nsrca.org 
>[mailto:discussion-request at nsrca.org] On
>Behalf Of John Pavlick
>Sent: Wednesday, October 06, 2004 10:52 PM
>To: discussion at nsrca.org
>Subject: RE: Practice tools
>
>Anthony,
> I haven't had much luck with any of the sims (although I 
>haven't tried the
>Ikarus 3D sim), mostly because it's hard to duplicate 
>pattern flying. What I
>mean is, the view ports don't really provide any good 
>reference points for
>lines, etc. I like to use the Ikarus Shock Flyers for 
>practice. You can fly
>them anywhere (even indoors in the Winter) and they're 
>not too expensive.
>The $60.00 kit with the can motor is fine if you use 
>small servos and a 3S
>340 LiPo pack. Keep it light!!! Leave the L.G. off - you 
>won't need it and
>it's heavy and breaks easily. Cheaper than the Formosa - 
>save your money for
>fuel!
>
>John Pavlick
>http://www.idseng.com
>
>
>> -----Original Message-----
>> From: discussion-request at nsrca.org
>> [mailto:discussion-request at nsrca.org]On Behalf Of 
>>Anthony Romano
>> Sent: Wednesday, October 06, 2004 7:12 PM
>> To: pattern at rcmailinglists.com; discussion at nsrca.org
>> Subject: Practice tools
>>
>>
>> Trying to get ready for the move for Master and 
>>wondering, what would be
>> better? A simulator or a pattern foamie? Thinking Ikarus 
>>flight sim or an
>> Axi equipped Formosa.
>>
>> TIA
>>
>> Anthony
>>
>> _________________________________________________________________
>> On the road to retirement? Check out MSN Life Events for 
>>advice on how to
>> get there! 
>>http://lifeevents.msn.com/category.aspx?cid=Retirement
>>
>> =====================================
>> # To be removed from this list, go to 
>>http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> ---
>> Incoming mail is certified Virus Free.
>> Checked by AVG anti-virus system 
>>(http://www.grisoft.com).
>> Version: 6.0.516 / Virus Database: 313 - Release Date: 
>>9/1/03
>>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system 
>(http://www.grisoft.com).
>Version: 6.0.516 / Virus Database: 313 - Release Date: 
>9/1/03
>
>=====================================
># To be removed from this list, go to 
>http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>
>============# To be removed from this list, go to 
>http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>
>
>=====================================
># To be removed from this list, go to 
>http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>

Evan H. Dygert
Dygert Consulting, Inc.
364 Twelve Oaks Dr.
Winter Springs, FL 32708
Tel: 407-739-8194
Email: evand at dygertconsulting.com
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.