Resolution

[Bob Pastorello]

I'm not proposing that I can certainly "feel" that kind of resolution difference, but I do know that I believe I notice the change around "centers" that the bigger steps cause.  Makes the subtleties of expo more important, and if you're not careful, you can get wandering around centers as you're hunting for those really small control corrections.

Of course, I'm one of those who doesn't know enough to know what he doesn't know, either.

Bob Pastorello
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Eddie Batchelor 
  To: discussion at nsrca.org 
  Sent: Tuesday, October 05, 2004 7:00 PM
  Subject: RE: Resolution


  QUOTE There are some pilots who really can tell the difference in resolution between 100% and 50% ATV, there are pilots who want the rest of us to think they can and then there's the rest of us.QUOTE

  Thanks Ron  - this makes me feel better about myself   :-))
  Eddie


    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Ron Van Putte
    Sent: Tuesday, October 05, 2004 7:17 PM
    To: discussion at nsrca.org
    Subject: Re: Resolution



    On Oct 5, 2004, at 6:09 PM, Wayne Galligan wrote:


      Try to get as close to a 100% ATV that you can by making your control horn longer if you can.  If your maxed out there and cant change anything then limiting you control with dual rates or lower ATV.   Remember when you use dual rate or lower ATV;s you are also losing some of you resolution or total steps in the throw of the servo arm.  Always try the mechanical adjustment first. Then use the radio functions.


    I agree with everything Wayne says, BUT, the truth is, most of us can't feel the effects of a difference in resolution with lower than 100% ATV. After all, before we had 1024 there was 512 and I can't remember anyone complaining about poor resolution back then. There are some pilots who really can tell the difference in resolution between 100% and 50% ATV, there are pilots who want the rest of us to think they can and then there's the rest of us.

    Ron Van Putte


      ----- Original Message -----
      From: Jeff Hughes 
      To: discussion at nsrca.org 
      Sent: Tuesday, October 05, 2004 5:46 PM
      Subject: Resolution

      My ailerons are way too sensitive on my Jupiter, Is it better to limit travel with dual rates?, or atv?, or is the resolution the same. (and yes, i'm on the inside of the servo arm and as far out as I can go on the aileron threaded rod).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041005/2de27969/attachment.html