Elev. Pull pull Question

[Tom Hinton]

Are both the horns on the bottom the same distance from the surface, same amount of threads?
  ----- Original Message ----- 
  From: Bob Pastorello 
  To: NSRCA 
  Sent: Friday, November 26, 2004 8:58 AM
  Subject: Elev. Pull pull Question


  May seem obvious, but I could use some help here....setting up my Excelleron, centers are okay, cable tensions are pretty close, centering is good.  Up elevator is fine, on Down elevator, ONE elevator moves farther, but they track together except at the endpoint, as close as I can tell.

  Anyone have suggestions on how I'd fine tune this out...??
  Hope everyone had a great T-day!!

  Bob Pastorello
  NSRCA 199  AMA 46373
  rcaerobob at cox.net
  www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041126/20da058c/attachment.html