Surface

[Nat Penton]

Rich I wonder who needs the accuracy provided by Tru-Stone. BTY I need your E address
  ----- Original Message ----- 
  From: richard.lewis 
  To: discussion at nsrca.org 
  Sent: Friday, November 19, 2004 2:09 PM
  Subject: RE: Surface


  Here's something to build on if you really, really, really, really want a very, very, very, flat surface...

  http://www.tru-stone.com/surface_plates.html

  Richard Lewis
    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Atwood, Mark
    Sent: Friday, November 19, 2004 2:09 PM
    To: discussion at nsrca.org
    Subject: RE: Surface


    I have gotten at least a dozen peices over the years at various Billiard stores.  Pretty much any store that specializes in pool tables will have chipped and broken slate sitting in their warehouse.   


    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Nat Penton
    Sent: Friday, November 19, 2004 2:34 PM
    To: discussion at nsrca.org
    Subject: Surface


    Mark where do you find the slate? Does it have to come from a table mfg ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041119/349ff97f/attachment.html