MK control horns

[Fletcher, Richard]

Check out this Tower's link -
http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=dubro+control+horns
<http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=dubro+control+horns&
FVPROFIL> &FVPROFIL=++
 
 
Rich

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Bruno Cavalcanti
Sent: Friday, November 19, 2004 11:16 AM
To: discussion at nsrca.org
Subject: Re: MK control horns


Troy,
    I think I didn´t explain very well. The loose part is not the triangle
plastic piece that holds the flying surface, but the small plastic piece
(with threads) that connects with the link that goes to the servo. Do you
know where I can buy them?
Bruno

----- Original Message ----- 
From: Troy A.  <mailto:troy_newman at msn.com> Newman 
To: discussion at nsrca.org <mailto:discussion at nsrca.org>  
Sent: Friday, November 19, 2004 12:09 PM
Subject: Re: MK control horns

Try a 2mm hex nut on the back side of the bolt. Sometimes I have seen them
appear loose but in reality the plastic is stripped out. I always use hex
nuts now as a standard thing when assembly the first time. I have never worn
one of these things out. This is with the amount of flying that I do. I had
one model over 3000 flights same connectors as day #1.
 
TN

----- Original Message ----- 
From: Bruno  <mailto:brunofhc at terra.com.br> Cavalcanti 
To: discussion at nsrca.org <mailto:discussion at nsrca.org>  
Sent: Friday, November 19, 2004 4:54 AM
Subject: MK control horns

 

Hi,
    I´ve been using the MK control horns rudder style in some of my control
surfaces, but now the plastic piece that connects with the control link is
getting loose. The hole in the plastic is increasing and the control surface
now has some free movements.
    I´d like to know where I can buy some replacements connectors. I tried
the central hobbies page but didn´t find the pieces alone.
Thanks, Bruno

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041119/c46378a5/attachment.html