Measuring Surface Flatness (was "Cabinet Grade Particle Board")

John Ferrell johnferrell at earthlink.net
Fri Nov 19 07:53:15 AKST 2004


Measuring Surface Flatness (was "Cabinet Grade Particle Board")The test for a Pool Table is to put a straight edge across it and try to slide a dollar bill under it.

BTW, I am surprised to hear the talk about using pins. One of the first things Dave Guerin taught me was to use masking tape instead!

John Ferrell   
My Competition is not my enemy! 
http://DixieNC.US

  ----- Original Message ----- 
  From: Mark Grabowski 
  To: 'discussion at nsrca.org' 
  Sent: Friday, November 19, 2004 11:21 AM
  Subject: Measuring Surface Flatness (was "Cabinet Grade Particle Board")


  We've seen some great ideas from several folks. However, a common element to this discussion is that you need to measure how flat the surface winds up. What tricks are you guys using to actually measure how flat the surface is of the bench you just built?







------------------------------------------------------------------------------


  Confidentiality Note: The contents of this e-mail message and its attachments, if any, are intended solely for the addressee(s) hereof. If you are not the named addressee, or if you believe this message has been addressed to you in error, you are requested not to read, disclose, reproduce, distribute, disseminate or otherwise use this information. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive confidentiality. If you have received this transmission in error, please alert the sender by reply e-mail. It is also requested that you immediately delete this message and its attachments, if any. Thank You. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041119/53fa6ec4/attachment.html


More information about the NSRCA-discussion mailing list