"Cabinet Grade Particle Board"....where can I find it?

[Ken Thompson III]

"Cabinet Grade Particle Board"....where can I find it?Dang Mark,
You like to go all out, don't you?:)
That'll work also, as long as you don't have to move it once in place, " Ouch, my back!"

Ken
  ----- Original Message ----- 
  From: Atwood, Mark 
  To: discussion at nsrca.org 
  Sent: Thursday, November 18, 2004 3:19 PM
  Subject: RE: "Cabinet Grade Particle Board"....where can I find it?


  My suggestion if you truly want something flat that won't warp or swell it to find a local Billard supply store and ask for a peice of chipped slate.  Most places will GIVE them away since they have to pay money to have them hauled away.  You can get a third of a full size table (roughly 30" x 48") or sometimes even a full slab for a mini table.  Both will weigh around 200#...so you'll need a solid table to put it on...   But it lasts forever, and is truer than true.

  -M
  PS. Just don't ask you're wife to help you carry 4 of them up 3 flights of stairs to your attic workshop...trust me on this one.


  -----Original Message-----
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Mark Grabowski
  Sent: Thursday, November 18, 2004 3:08 PM
  To: 'discussion at nsrca.org'
  Subject: RE: "Cabinet Grade Particle Board"....where can I find it?


  Ken, what exactly is the material you are referring to? Do you feel it would be superior to MDF? I understand the material needs to be supported to prevent sag...I just don't want anything that'll swell with moisture if I need to leave the sheets in the garage...
    -----Original Message-----
    From: Ken Thompson III [mailto:mrandmrst at comcast.net]
    Sent: Thursday, November 18, 2004 1:59 PM
    To: discussion at nsrca.org
    Subject: Re: "Cabinet Grade Particle Board"....where can I find it?


    Mark,
    We in the "Biz" don't use MDF, medium density fiberboard, to build cabinets, unless you want one "heavy as heck" cabinet, no offense Dean.

    Although the MDF would work fine, though very heavy, industrial grade particle board is what would be used in cabinet making, beneath the veneers.  The material can be found at your local HD, use the sheet that measures 49"x97".

    We do use the MDF in making paint grade door panels and such, due to its superior density.

    Ken
      ----- Original Message ----- 
      From: Mark Grabowski 
      To: 'discussion at nsrca.org' 
      Sent: Thursday, November 18, 2004 12:40 PM
      Subject: "Cabinet Grade Particle Board"....where can I find it?


      Gents, I've seen references to using cabinet grade particle board for making very flat building surfaces. I'm assuming this isn't something I'll find at my local home depot. Any suggestions? (I'm in the Chicago suburbs)

      This is a solicitation for business and to be removed from our list please email at: 
      mgrabowski at fmtinv.com <mailto:mgrabowski at fmtinv.com> 
      Mark Grabowski 
      Account Executive 
      Ph: 630-515-4747 
      Fax: 877-316-7401 



--------------------------------------------------------------------------


      Confidentiality Note: The contents of this e-mail message and its attachments, if any, are intended solely for the addressee(s) hereof. If you are not the named addressee, or if you believe this message has been addressed to you in error, you are requested not to read, disclose, reproduce, distribute, disseminate or otherwise use this information. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive confidentiality. If you have received this transmission in error, please alert the sender by reply e-mail. It is also requested that you immediately delete this message and its attachments, if any. Thank You. 



------------------------------------------------------------------------------


  Confidentiality Note: The contents of this e-mail message and its attachments, if any, are intended solely for the addressee(s) hereof. If you are not the named addressee, or if you believe this message has been addressed to you in error, you are requested not to read, disclose, reproduce, distribute, disseminate or otherwise use this information. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive confidentiality. If you have received this transmission in error, please alert the sender by reply e-mail. It is also requested that you immediately delete this message and its attachments, if any. Thank You. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041118/944272c7/attachment.html