Access to Member Page

[Bob Pastorello]

Yah.  Me too.
Thanks to whoever fixed it.

Bob Pastorello
NSRCA 199  AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Charlie Rock 
  To: discussion at nsrca.org 
  Sent: Wednesday, November 17, 2004 9:10 PM
  Subject: Re: Access to Member Page


  Thanks tried that and it worked...Charlie Rock
  ----- Original Message ----- 
  From: "Larry Diamond" <lld613 at psci.net>
  To: <discussion at nsrca.org>
  Sent: Wednesday, November 17, 2004 9:15 PM
  Subject: Re: Access to Member Page


  > If using Adobe Reader 6.0 you may get an error if you try to open the link 
  > with out saving it first.
  >
  > Try these steps, it never failed me...
  >
  > 1. Right click mouse on the K-Factor you wish to open.
  > 2. Select "Save Target As..."
  > 3. Open the folder you wish to save the K-Factor in. I save mine in a 
  > folder called, "K-Factor".
  > 4. Type in the file name you wish to save the K-Factor Copy as.
  > 5. Click the Save button.
  > 6. When it's finished copying, select the Close button.
  > 7. Open Adobe Acrobat Reader 6.0 and locate the file to open.
  >
  > You should be able to open the file with no problem. Looks like allot of 
  > steps but really easy to do.
  >
  > Larry Diamond
  >
  >
  > ----- Original Message ----- 
  > From: "Ed Hartley" <roho2 at rcpattern.com>
  > To: <discussion at nsrca.org>
  > Sent: Wednesday, November 17, 2004 8:33 PM
  > Subject: Re: Access to Member Page
  >
  >
  >>I just downloaded it and no problem. There are reports Adobe Reader 6.0 
  >>causes error reports from time to time. If you have 5.0 you might want to 
  >>load it.
  >>
  >> Later,
  >> Ed Hartley
  >> roho2 at rcpattern.com
  >>
  >> ----- Original Message ----- 
  >> From: <JonLowe at aol.com>
  >> To: <discussion at nsrca.org>
  >> Sent: Wednesday, November 17, 2004 5:17 PM
  >> Subject: Re: Access to Member Page
  >>
  >>
  >>>I downloaded it earlier this afternoon ok, but just got your error when 
  >>>trying it again.
  >>>
  >>> Jon Lowe
  >>>
  >>> In a message dated 11/17/2004 4:42:10 PM Eastern Standard Time, "Bob 
  >>> Pastorello" <rcaerobob at cox.net> writes:
  >>>
  >>>>Anyone else getting a Microsoft jet "unspecified error" when trying to 
  >>>>get the K-Factor?
  >>>>
  >>>>Bob Pastorello
  >>>>NSRCA 199 AMA 46373
  >>>>rcaerobob at cox.net
  >>>>www.rcaerobats.net
  >>>>
  >>>>
  >>> =================================================
  >>> To access the email archives for this list, go to
  >>> http://lists.f3a.us/pipermail/nsrca-discussion/
  >>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
  >>> and follow the instructions.
  >>>
  >>>
  >>
  >> =================================================
  >> To access the email archives for this list, go to
  >> http://lists.f3a.us/pipermail/nsrca-discussion/
  >> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
  >> and follow the instructions.
  >>
  >>
  >
  >
  > =================================================
  > To access the email archives for this list, go to
  > http://lists.f3a.us/pipermail/nsrca-discussion/
  > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
  > and follow the instructions.
  >
  > 


  =================================================
  To access the email archives for this list, go to
  http://lists.f3a.us/pipermail/nsrca-discussion/
  To be removed from this list, go to http://www.nsrca.org/discussionA.htm
  and follow the instructions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041118/a6165304/attachment.html