honeycombing foam cores

[Jim Ivey]

>  Mike
If you have a gun type soldering iron,you can remove the tip and replace it with #14 gage solid wire and bend to any shape you like. Just pull the trigger and start cutting. I just finished cutting Aileron cutouts in 4 sets of wings yesterday.

Jim Ivey
> From: "Mike Hester" <kerlock at comcast.net>
> Date: 2004/11/11 Thu AM 10:00:58 EST
> To: <discussion at nsrca.org>
> Subject: honeycombing foam cores
> 
> Hi Gents,
> 
> I am in the process of trying new things, and I have the need to honeycomb a few wing and tail cores. What I am trying to find is a source for a power supply/variac and set up with the probes so I can accomplish this. I seem to remember someone having a home made one that worked well, but of course it's been a while and I can't remember who or what.
> 
> Can somebody help me out here? 
> 
> Thanks,
> -Mike
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.