[SPAM] RE: Nylon gears for Airtronics 94358

[Ed Alt]

Hi Ron:
My 94358 metal gears are already sloppy from the thumping they took in the big gassers though.  Because of that, rather than spend $25 for a set of metal gears, I could just sell these cheap and get some JR digital SA stuff to replace them.  Oh well...

Thanks
Ed
  ----- Original Message ----- 
  From: ronlock at comcast.net 
  To: discussion at nsrca.org ; discussion at nsrca.org 
  Sent: Monday, November 01, 2004 7:42 AM
  Subject: [SPAM] RE: Nylon gears for Airtronics 94358


  Ive had same experience with the 94358s, in a pattern bird with soft mount engine, the metal gears hold up pretty well.
  Ron Lockhart
    -------------- Original message -------------- 

    > Hey Ed, 
    > 
    > I'll be talking to Bobby at Airtronics this week and will let you know. I've 
    > been using the 358's for rudder servo's since they were available and the 258's 
    > and 158's prior to that. Awesome servo's for strength and speed. I have never 
    > changed away from the metal gears, but then with a servo that strong, I haven't 
    > had a lot of wear using them just on the rudder. 
    > 
    > Mark 
    > 
    > 
    > 
    > ________________________________ 
    > 
    > From: discussion-request at nsrca.org on behalf of Ed Alt 
    > Sent: Sun 10/31/2004 8:52 AM 
    > To: discussion at nsrca.org 
    > Subject: Nylon gears for Airtronics 94358 
    > 
    > 
    > Are nylon replacement gears available for the Airtronics 94358? If not, has 
    > anyone ever figured out some other combo of available nylon gears to make this a 
    > useful Pattern servo? I've got a few of these with worn out metal gears from my 
    > IMAC days and would like to use them again if possible. They're a fairly good 
    > servo for a non-digital. 
    > 
    > Thanks 
    > Ed 
    > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041101/7fe4afb6/attachment.html