YS-60

[Steven maxwell]

 If your going though bearings fast make sure you don't have any brass in your system, clunk or tubing change to chrome and aluminium tubing, and make sure you have plenty of cooling 3 to 1  exit 3 times as intake.

Alan Schiaffino <alan at schiaffino.org> wrote:Thanks Jim, I'll give them a call. Hmmm... a 120... now where is my
shoehorn????? Enjoy the weekend.

--alan

On Fri, 21 May 2004 jivey61 at bellsouth.net wrote:

>
> > Alan
> Have you tried www.bocabearing.com/Genginekits.cfm
> I believe the bearing you need is ENK-002.
> Go to the site and check it out. It might be better to call and get them to cross reference it for you.
>
> Jim Ivey
> > From: "Mark Hunt" 
> > Date: 2004/05/21 Fri PM 10:23:49 EDT
> > To: 
> > Subject: Re: YS-60
> >
> > sorry to hear that Alan, I've got a 120 w/ pipe sittin on the bench.....got
> > a shoehorn?
> >
> > mark

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



Steve Maxwell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040521/e6cae041/attachment.html