YS-60

[jivey61 at bellsouth.net]

> Alan
Have you tried www.bocabearing.com/Genginekits.cfm
I believe the bearing you need is ENK-002.
Go to the site and check it out. It might be better to call and get them to cross reference it for you.

Jim Ivey
> From: "Mark Hunt" <flyintexan at houston.rr.com>
> Date: 2004/05/21 Fri PM 10:23:49 EDT
> To: <discussion at nsrca.org>
> Subject: Re: YS-60
> 
> sorry to hear that Alan, I've got a 120 w/ pipe sittin on the bench.....got
> a shoehorn?
> 
> mark
> ----- Original Message ----- 
> From: "Alan Schiaffino" <alan at schiaffino.org>
> To: <discussion at nsrca.org>
> Sent: Friday, May 21, 2004 8:12 PM
> Subject: YS-60
> 
> 
> > Well looks like I won't be able to make to Temple. Just lost a bearing on
> > my engine while practicing for tomorrow. Does anybody have any experience
> > with this engine? Seems I go thru bearings pretty quick (~60 flights).
> > I've used Omega, CoolPower, PowerMaster 20/20, and always run the engine
> > on the rich side.
> > =====================================
> > # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> 
> 
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.