K2R Spot Remover

[Don McCullough]

I found K2R Spot Remover in Save Mart supermarkets in the SF bay area. It 
works really well on fiberglass. I used it with great success on 
fiberglass/nomex.

Don McCullough


----- Original Message -----
From: "Jerry Budd" <jbudd at QNET.COM>
To: <discussion at nsrca.org>; <mini-iac at yahoogroups.com>
Sent: Saturday, May 15, 2004 5:34 PM
Subject: K2R Spot Remover


 > Hi all,
 >
 > Does anyone know if K2R Spot remover is available in California?  I
 > seem to remember hearing something about the California Air Quality
 > Board banning it.  I've checked most of the local retail outlets
 > (drug stores, home improvement centers, etc) and haven't been able to
 > find any.
 >
 > I'm about to strip, repair, and repaint the cowling on my E=MC3 and
 > I'd like to make sure I get all the oil off the interior before I
 > start.  K2R does a great job in lifting and drying out oil from wood
 > so I thought I'd try it on the fiberglass.
 >
 > Suggestions?
 >
 > Thx, Jerry
 > --
 > ___________
 > Jerry Budd
 > mailto:jbudd at qnet.com
 > =====================================
 > # To be removed from this list, go to 
http://www.nsrca.org/discussionA.htm
 > and follow the instructions.
 >
 >


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.