prop for YS140FZ

[Don Ramsey]

Try teflon tape on the header.  Get it at the hardware store.  It's the
stuff plumbers use on pipes.

DR
----- Original Message ----- 
From: <Hotrod34a at aol.com>
To: <discussion at nsrca.org>
Sent: Thursday, May 13, 2004 6:24 AM
Subject: Re: prop for YS140FZ


> Jon,
>   I am running a 16x11 on my 140FZ Sport in my Temptations, turning around
8900 on the ground.  Prop responds well and down lines and landings are good
and slow with this prop.  I have also tried a 17x10.  Turns fine, smooth
through the pattern, does not jump when you hit the throttle hard. Little
slower on up lines but still plenty of power.  No problems with headers
coming loose.  Good luck, Larry
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.