Tuned pipe for Quest

[Dean Pappas]

Hi Jon,
I'm with Nat on this one: keep the gap between the pipe and the edges of the cutout small (1/8" if the pipe shake at idle will permit) and there will be no penalty in cooling draw through the pipe tunnel.
Regards,
	Dean

-----Original Message-----
From: Nat Penton [mailto:natpenton at centurytel.net]
Sent: Friday, May 07, 2004 10:45 AM
To: discussion at nsrca.org
Subject: Re: Tuned pipe for Quest


Jon there is not a pipe that will fit the Quest pipe compartment.  Open the
center of the pipe cover and let the pipe be partially exposed.
----- Original Message ----- 
From: <JonLowe at aol.com>
To: <discussion at nsrca.org>
Sent: Friday, May 07, 2004 8:26 AM
Subject: Tuned pipe for Quest


> Someone here a few weeks ago mentioned they had put a tuned pipe for a 2
stroke on a Quest by Creek Hobbies.  I have a Macs 15cc quiet pipe that
won't even come close to fitting in the belly pan.  Anybody know what
muffled pipe will fit?  I am using and ST 91 with a Mueller wrap around
header.
>
> Jon Lowe
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

==================# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.