Futaba 9ZAP Problem

[jivey61 at bellsouth.net]

 Ron
 I have been waiting on someone to tell you to get a JR.HAHA
 Jim Ivey
> 
> From: Ron Van Putte <vanputte at cox.net>
> Date: 2004/05/05 Wed PM 05:50:39 EDT
> To: discussion at nsrca.org
> Subject: Re: Futaba 9ZAP Problem
> 
> 
> 
> I have received several suggestions and I appreciate them.  However, 
> some of the responses indicated that the writer didn't understand the 
> problem.  I had a flying system that was working perfectly.  Then one 
> day the throttle didn't work.  The first thing I tried was reversing 
> channel 3.   I ended up trying a totally untouched model on the 9Z 
> (default model).  It didn't improve anything.  Then I tried a different 
> transmitter, again with a totally untouched model.  It worked 
> perfectly.  I'm still stumped.
> 
> Ron Van Putte
> 
> > -----Original Message-----
> > From: discussion-request at nsrca.org 
> > [mailto:discussion-request at nsrca.org]
> > On Behalf Of Ron Van Putte
> > Sent: Wednesday, May 05, 2004 10:16 AM
> > To: discussion at nsrca.org
> > Subject: Futaba 9ZAP Problem
> >
> > All - I have tried everything I can think of and still can't solve a
> > problem.  I have a Futaba 9ZAP transmitter and was using it in the PPM
> > mode to fly a GWS Slow Stick, using a GWS R4P receiver.  Everything was
> > fine until one day I went to fly the Slow Stick.  The aileron, elevator
> > and rudder servos worked fine, but the motor would not work.  I tried
> > everything I could think of, including trying an unused model in the
> > 9ZAP.  Nothing worked.  Then I tried a different Futaba 9ZAP
> > transmitter and everything worked fine.  Huhhhhh?  Any ideas?
> >
> > Ron Van Putte
> >
> > =====================================
> > # To be removed from this list, go to
> > http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > =====================================
> > # To be removed from this list, go to 
> > http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> 
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.