2 Cycle Setup on a Pipe

[Ed Hartley]

Check out http://www.rcpattern.com/2cycle.htm

Ed
----- Original Message ----- 
From: "Brian Young" <b4598070 at yahoo.com>
To: <discussion at nsrca.org>
Sent: Monday, March 29, 2004 4:16 PM
Subject: 2 Cycle Setup on a Pipe


> I have recently been tuning on my exhaust and have a
> basic understanding but want some more information.
>
> I have a Webra 1.60 w/ MC carb and a Webra pipe w/ a
> disk baffle.
>
> Im gradually shortening this pipe setup hoping to hit
> the correct length. The problem I find with this setup
> is the MC carb doesnt lend itself to a test stand
> since the mixture is servo controlled. So I shorten
> pipe and fly, shorten and fly.
>
> The thing Im most curious about is if you had a setup
> no one else has how do you determine a close first
> guess for the pipe length if you want to cut down the
> trial and error? I had a starting point but was just
> puzzling over this.
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Finance Tax Center - File online. File on time.
> http://taxes.yahoo.com/filing.html
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.