Servo Types

[william krueger]

For the money you want to spend, I would recommend the Hitec digital servos in the 60 in/oz range, might cost a few bucks more than what you want to spend but well worth it.

The best servos are digital, corless..... I think the absolute best are the high buck JR digitals with virtually no dead band but you pay about $100.00 per for these.
  ----- Original Message ----- 
  From: Ed Miller 
  To: discussion at nsrca.org 
  Sent: Sunday, March 21, 2004 5:16 AM
  Subject: Fw: Servo Types



    ----- Original Message ----- 
    From: Ryan Wiesehan 
    To: discussion at nsrca.org 
    Sent: Saturday, March 20, 2004 5:37 PM
    Subject: Servo Types


    Hello,

    I tried to research this on my own without rehashing servo talk on the list, but I couldn't find an answer that satisfied my curiosity.  I will outline my research first so that you may better help me out.  I want to put new servos in my Used Summit III, it has 148's in it now and I think it flies great, no problem with torque, and there isn't a centering problem between days and flights.  But, I am always hearing that better servos will make you fly better.  And I want to be a better flier.  So, I have spent the last three weeks researching servos.  This research must be one of those instances when you are confused because you are paying attention.  I want is spend less than $180, $25 - $40 per servo and 40oz ok ailerons, 60oz rudder and elevator.  Here is how it breaks down in my mind from the research.  

     

    1.         The four basic qualifying specs for servos:  speed, torque, weight and price.

    2.         Then you have motor type and non-digital vs. digital.

    3.         Lastly, you have brand, and I've tried JR, Futaba, Hitec, TowerHobbies and Expert.  

     

    I am most interested in hearing your opinions about #'s 1 and 2; I don't really care to debate brand in this thread

     

     

    3-pole non-digitals; can have problems centering due to the splits in the armature.

     

    5-pole non-digitals; don't know there isn't really much information.  Would someone help?) I assume they have better centering and maybe more power than a 3-pole, I am thinking these might work for me so please try and sell me on the coreless. 

     

    Coreless non-digital; has a different armature system without poles that allows for better centering and a lighter core.  Most of the low end coreless seem like they are slower than a 3-pole.  I am starting to thing that the standard specs for speed are misleading. If the coreless motor is lighter and accelerates more quickly than a 3-pole why does a $30 coreless post the same specs as $9 el cheapo?

     

    Now, here is where I really get confused, change all of the above to digitals.  If the circuit board is always sending centering and position location at 3 times the rate previously to a 3-pole motor, why wouldn't I want to buy it?  It should center fine because with a digital servo centering is powered. 

     

    Wow, sorry, that was a long email.  I guess all that I am asking is for someone to explain why money spent on servos is valid.  Because, I just took out my plane last weekend after all this research and I couldn't figure out how it could be better. 

     

    Thanks,

     

    Ryan Wiesehan

     

    FreightQuote.com

    New Business Sales 

     

     

     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040321/482c86ca/attachment.html