Focus 2 Right Thrust

[Scott Pavlock]

  Thank you very much!!!!
  _______________________________________________________________
  Scott Pavlock
  586-295-2611

  groups.msn.com/scottspatternpage

  photos.yahoo.com/f3aflyer7
    ----- Original Message ----- 
    From: Henderson,Eric 
    To: discussion at nsrca.org 
    Sent: Monday, March 08, 2004 10:29 PM
    Subject: RE: Focus 2 Right Thrust


    It comes with 3 degrees.

    The sides of the fuselage are parallel at the front and the front former is square. The two blades of the ply engine box insert give you the correct down and side thrust. If you are using a big prop like a 17 x 13 I would add  1/2 degree more side thrust. You can measure your side thrust relative to the fuselage sides.

    Regards,

    Eric.


    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Scott Pavlock
    Sent: Monday, March 08, 2004 8:34 PM
    To: NSRCA Discussion Page
    Subject: Focus 2 Right Thrust


    Could someone please tell me what is the correct amount of degrees of right thrust in the Focus 2?

    Thanks in advance!
    _______________________________________________________________
    Scott Pavlock
    586-295-2611

    groups.msn.com/scottspatternpage

    photos.yahoo.com/f3aflyer7

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040309/4e502f0c/attachment.html