Coupler Size for Mintor Header/Pipe

[Bob Pastorello]

Here ya go....I chose a fashionable light blue color....it's on p. 98 of their online catalog at 
www.mcmaster.com

      McMaster Number = 5236K951
      (Same as 5236K95) 
            Silicone Rubber Tubing Soft, 3/4" ID, 1" OD, 1/8" Wall, Blue 
                 
                  Quantity Per Ft. 
                  1-99 Ft. $3.43 
           
     


Bob Pastorello, Oklahoma
NSRCA 199, AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Gray E Fowler 
  To: discussion at nsrca.org 
  Sent: Wednesday, March 03, 2004 9:57 AM
  Subject: Re: Coupler Size for Mintor Header/Pipe



  Bob 

  How about a catalog part number??? The thing I hate about regular couplers is that they are so thick that they are heavy. This sounds interesting....and I have at least $9 that I can experiment with.



  Gray Fowler
  Principal Chemical Engineer
  Composites Engineering 


       "Bob Pastorello" <rcaerobob at cox.net> 
        Sent by: discussion-request at nsrca.org 
        03/03/2004 09:30 AM 
        Please respond to discussion 

               
                To:        <discussion at nsrca.org> 
                cc:         
                Subject:        Re: Coupler Size for Mintor Header/Pipe 



  There is also TERRIFIC and long-lasting, flexible, 1/8" wall, high temp silicone tubing available from McMaster Carr.  I bought a THREE foot length for about $9....it will make couplers that are VERY flexible, durable, and that length will last for YEARS.... 

  Bob Pastorello, Oklahoma
  NSRCA 199, AMA 46373
  rcaerobob at cox.net
  www.rcaerobats.net 
    
    
  ----- Original Message ----- 
  From: Wayne Galligan 
  To: discussion at nsrca.org 
  Sent: Wednesday, March 03, 2004 8:45 AM 
  Subject: Re: Coupler Size for Mintor Header/Pipe 

  Moose-Boy, 
    
  3/4"   If you can get the AeroTrends  Ultra Blue silicon part #1039 coupler would work best.  Their phone# is 203-734-0600 if you cant get through your LHD. 
    
  Wayne G. 
  ----- Original Message ----- 
  From: Michael Laggis 
  To: NSRCA 
  Sent: Wednesday, March 03, 2004 8:35 AM 
  Subject: Coupler Size for Mintor Header/Pipe 

  I want to order some spare coupler material for my Mintor.  What is the best size to use (3/4 or 7/8)?   

  Thanks
  Michael Laggis
  AKA Moose Boy
  NSRCA 3618 
  http://www.alaskarc.org 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040303/118ff62f/attachment.html