cf tubes

[Andre Bouchard]

Ed,

The PBG tube is too thin to tap.  Recommend you follow John's advice.

Regards,

Andre'
  ----- Original Message ----- 
  From: Ed Deaver 
  To: NSRCA Disscussion 
  Sent: Saturday, June 26, 2004 1:32 AM
  Subject: cf tubes


  To save weight, I am switching to the PBG CF wing and stab tube.  In this plane I already have a 4*40 bolt in the wing and stab as my fastening method.

  Can you drill and tap these tubes successfully wicked with thin CA after tapping?  Realize the stab tube will only be taken off rarely.  One of the wing bolts will be removed on a regular basis.

  Or, do I have to glue a piece of ply to the inside of the tubes and tap that?

  Before it comes up, I do not want to change my mounting system unless it absolutely needed.

  Thanx in advance.

  ed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040626/9da91da9/attachment.html