YS91FZ Dimensions and Weight

[richard.lewis]

Never mind - I got it.  57mm from front hole to drive washer and 750
grams...Thanks

Richard

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of richard.lewis
Sent: Thursday, June 24, 2004 2:38 PM
To: discussion at nsrca.org
Subject: YS91FZ Dimensions and Weight


Anyone got a good set of dimensions (like from the manual) or an accurate
AutoCAD drawing of the 91FZ?

Mainly, I need the distance from the mounting holes to the drive washer
face.

Also anyone know the weight of the 91FZ with the standard muffler?

My 91FZ is buried in my currently flying aircraft and I need to measure some
things on the new airplane I'm building.

Thanks
Richard Lewis

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.