Vibra Damp Isolators.

[Fausto Henriques]

Thanks for all the replies.
Fausto

-----Original Message-----
From: Paul Horan <phoran at vvm.com>
To: discussion at nsrca.org <discussion at nsrca.org>
Date: Sábado, 19 de Junho de 2004 13:31
Subject: Re: Vibra Damp Isolators.


>I have had a problem with insect repellant (deet) melting all kinds of
plastic
>devices in my flight box.  Only took a week or two.  It melted my tach,
earplugs
>and some other stuff.
>Hope this helps,
>Paul
>----- Original Message -----
>From: "Eddie Batchelor" <perkinsrx at centurytel.net>
>To: <discussion at nsrca.org>
>Sent: Saturday, June 19, 2004 10:26 AM
>Subject: RE: Vibra Damp Isolators.
>
>
>> I did not keep the original message and don't remember if this was stated
or
>> not.
>>
>> be very interested to know if the isolators were kept in their origianl
>> plastic bags or kept loose in a container.  If loose in a plastic drawer,
>> then I highly suspect the plastic reaction. I've melted quite a few
fishing
>> lures in my time. :-))
>>
>> If they were in a zip-lock bag or the original bag, then everything
changes
>> as to suspect causes - maybe the solvent suggesstion.
>>
>> Eddie
>>
>>
>> -----Original Message-----
>> From: discussion-request at nsrca.org
>> [mailto:discussion-request at nsrca.org]On Behalf Of Martin X. Moleski, SJ
>> Sent: Saturday, June 19, 2004 10:18 AM
>> To: discussion at nsrca.org
>> Subject: Re: Vibra Damp Isolators.
>>
>>
>> --On Friday, June 18, 2004 8:14 PM -0400 John Ferrell
>> <johnferrell at earthlink.net> wrote:
>>
>> > ... If you have them stored in plastic boxes or drawers there may be a
>> reaction
>> > with that plastic. This is a common problem with some fishing lures and
>> tackle boxes.
>>
>> I have melted a plastic piece on a Dubro glo-extension
>> by leaving it too near a tube of universal hardner for
>> Bondo.
>>
>> The hardner is evaporating from the tube, I guess.
>> I noticed the problem a couple of weeks ago and haven't
>> fixed it yet.  Very educational!
>>
>> Dunno if the fellow has any similar solvents near his
>> isolators that might affect them.
>>
>> Marty #2874
>> =====================================
>> # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>>
>> =====================================
>> # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>=====================================
># To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>and follow the instructions.

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.