Temptation question

[mdarr00 at comcast.net]

Thank you all for the responses on the use of ca on the Temptation fuse.  The reason I asked the question, is because I want to do what Larry did.  That is to use the ca to tack things in place, then use epoxy and microballoons for the final gluing.

Thanks again,

Mike Darr
District 4
  ----- Original Message ----- 
  From: Hotrod34a at aol.com 
  To: discussion at nsrca.org 
  Sent: Thursday, June 17, 2004 9:34 PM
  Subject: Re: Temptation question


  Mike,
      I experienced no problems using the medium or thick CA.  I have not used the thin CA.  But I mostly elected to use the 30 minute epoxy for most of my construction on both of my Temptations mainly becuase I like to mix Micro balloons to give a much broader surface for adhesion (sp).  I mainly used the medium CA just to tack the tank mounts, etc.  But it will not attack the foam from my experiences...Larry....
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040618/7263a73b/attachment.html