Yeehaw,Whoopie

[Brian Young]

The webra carbs are a pretty simple machined piece,
could be duplicated in machinable plastic. The Mintor
people could easily make a plastic carb body since
they are already tooled for it and might be responsive
as a smaller company......

--- Nat Penton <natpenton at centurytel.net> wrote:
> I installed an old Perry carb on the 91FX. It landed
> with the same idle speed as at takeoff. An
> unsuspected additional, but understandable, benefit
> was much better braking on the downlines. There may
> be slightly less top end power but the benefits far
> outweigh the loss, if any. The Perry has a brass
> barrell which has a lower coef of expansion than
> alum. OS needs to reengineer the FX carbs and also,
> I presume, the RX carbs.There may be other carb
> options availiable that I am not aware of ?         
>              Nat Penton



	
		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail 
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.