Webra Problem

[Lance Van Nostrand]

Easy first try is to increase the pump pressure a bit.  Turn in the pump screw 1/2 turn only.  If this doesn't work, the more complex advice of others can be tried.
--Lance

  ----- Original Message ----- 
  From: Randy 
  To: discussion at nsrca.org 
  Sent: Wednesday, June 09, 2004 12:55 PM
  Subject: Webra Problem


  My webra 145 with a normal carbo seems to be losing power on the up lines.  It seems to me that the pump should delive a near constant flow of fuel.  So I should not need to have is real rich on the high end to handle the up lines.  But still losing power on uplines, so have been richening it.

  Low end seems fine.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040609/1b20f15d/attachment.html