Fixing foam sheeted parts

[Keith Hoard]

You can heat up polyurethane glue and it will run right into the crack.
Just tape it closed while it cures.  Oh yeah, the glue will begin curing
very soon after you heat it up.  

My technique is to put a bead of poly-u right on the crack, warm with a heat
gun, open up the crack to let the glue run in, then tape closed.

Keith L. Hoard
Cordova, TN
khoard at midsouth.rr.com

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of jivey61 at bellsouth.net
Sent: Sunday, June 06, 2004 9:47 PM
To: discussion at nsrca.org
Subject: Re: Fixing foam sheeted parts

Jason
 You can use aliphatic glue(similar to white glue).Works good on balsa and
foam and won't attack the foam.

Jim Ivey
> 
> From: "Jason" <jasonshulman at cox.net>
> Date: 2004/06/06 Sun PM 09:01:16 EDT
> To: "IMAC" <mini-iac at egroups.com>, 
> 	"NSRCA" <discussion at nsrca.org>
> Subject: Fixing foam sheeted parts
> 
> Hi All,
> 
> I have a couple of foam sheeted parts that I need to fix. They have cracks
> through the balsa and into the foam. I was thinking of thinning down
epoxy,
> but I don't know what to thin it with that won't eat the foam. Anyone with
> any fixes for this?
> 
> Thanks,
> Jason
> www.jasonshulman.com
> 
> 
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.