pipe tuning vs nitro

Dean Pappas d.pappas at kodeos.com
Fri Jun 4 09:17:01 AKDT 2004


Yo Anthony
OK, nitro widens both the pipe length and mixture sweetspots.
Maybe it'll help kill the midrange richness the you had with the shorter pipe.
Of course, maybe you don't need to change a thing, and embrace the new level flight speed.
Ludicrous speed is bad ... hmmkay?
Dean

-----Original Message-----
From: Anthony Romano [mailto:anthonyr105 at hotmail.com]
Sent: Friday, June 04, 2004 10:43 AM
To: discussion at nsrca.org
Subject: RE: pipe tuning vs nitro





>From: "Dean Pappas" <d.pappas at kodeos.com>
>Reply-To: discussion at nsrca.org
>To: <discussion at nsrca.org>
>Subject: RE: pipe tuning vs nitro
>Date: Fri, 4 Jun 2004 10:13:11 -0400
>
>Hey Anthony,
>More nitro widens the pipe length sweet spot. Add some nitro and see if you 
>can shorten pipe.

<<<<<    Now I am confused. I am running a little longer to smooth the 
response at the cost of power. I was thinking of adding nitro to give back 
the power. If I shorten the pipe and add nitro will I have to "prepare for 
ludicrous speed"? Or will the nitro help my engines manners?
7800 is not bad but after flying the shorter setting it is disappointing. 
The main factor is the lost of level speed especially in the wind we have 
had lately. Kept wanting to push the stick farther forward last night.

Anthony





>If you're turning the 15-3/4 X 11 at 7,800 then I'll bet you have no 
>"limiting" problem.
>Did you really loose vertical horsepower or just a little bit of 
>level-flight speed?
>Dean
>
>
>-----Original Message-----
>From: Anthony Romano [mailto:anthonyr105 at hotmail.com]
>Sent: Friday, June 04, 2004 9:53 AM
>To: discussion at nsrca.org
>Subject: pipe tuning vs nitro
>
>
>
>I have been trying to wrestle with a compromise. My current setup is OS rx
>with the little ES pipe and Mac header set to 25" from plug to baffle. This
>yeilds 8000 rpm on 15.75*11*3 on 20% S&W. The power is great but there is
>some spooling issues on down lines and a gurgle on lower throttle settings.
>Lengthening the pipe a half inch improved the manners of the setup but cost
>me 200 ground rpm but in the air it feels restrained. Which of course I
>hate. Am I drunk with horsepower or should I try more nitro to get the best
>of both worlds? Will 25% give me what I want? What are most peoples setups?
>Dean and Dave are you out there?
>
>TIA
>
>Anthony
>
>_________________________________________________________________
>Looking to buy a house? Get informed with the Home Buying Guide from MSN
>House & Home. http://coldwellbanker.msn.com/
>
>=====================================
># To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>
>====================================# To be removed from this list, go to 
>http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>

_________________________________________________________________
Stop worrying about overloading your inbox - get MSN Hotmail Extra Storage! 
http://join.msn.click-url.com/go/onm00200362ave/direct/01/

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

==================# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



More information about the NSRCA-discussion mailing list