Prop size

[David Gundling]

Message text written by INTERNET:discussion at nsrca.org
>I am running a SuperTigre ST2300 on 15% Cool Power and a pitts muffler and
Cline regulator. It is turning an APC 17 X 10N prop at about 7900 rpm.
I would like to switch to a prop that will give some more pull. I have lots
of ground clearance.
Any recommendations ?

<

Try an 18-8. Should get about the same RPM without having to readjust very
much.
==================# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.