YS140 DZ

[Earl Haury]

Yup - the drawing is backwards. The spring goes to the side with the
machined X. (Spring away from engine on top - toward on bottom.)

Earl
----- Original Message ----- 
From: <jivey61 at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Thursday, July 29, 2004 7:57 AM
Subject: YS140 DZ


> Hi all
> Can someone tell me if the parts breakdown on the 140DZ pump is correct. I
am speaking of the directions the pump valves are shown.I turned the bottom
one reversed to way it is shown and the eng. runs.
>  Thanks
>  Jim Ivey
> P.S a dirty pump cost me at the nats.
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.