Cable Setup Re-Discovery

[Del Rykert]

I feel we just made more mistakes and had bigger learning curve. I know I
had quite a few without others to lean on/learn from except at contests or
the NATS.

    del

----- Original Message ----- 
From: "Bob Pastorello" <rcaerobob at cox.net>
To: <discussion at nsrca.org>
Sent: Sunday, July 18, 2004 9:49 AM
Subject: Re: Cable Setup Re-Discovery


> Depends on who you ask, Del.... <BG>
> But thanks...we all have a LOT of experience (read "screw-ups) to share!
>
> How did we do this before the Internet ???
>
> Bob Pastorello
> rcaerobob at cox.net
> www.rcaerobats.net
>
>
> ----- Original Message ----- 
> From: "Del Rykert" <drykert at localnet.com>
> To: <discussion at nsrca.org>
> Sent: Sunday, July 18, 2004 8:38 AM
> Subject: Fw: Cable Setup Re-Discovery
>
>
> > Bob is a great asset to the list and pattern community as many are.
Thanks
> > Bob.
> >
> >         del
> >
> > ----- Original Message ----- 
> > From: Mike Austin
> > To: discussion at nsrca.org
> > Sent: Sunday, July 18, 2004 10:54 AM
> > Subject: Re: Cable Setup Re-Discovery
> >
> >
> > Bob, Thanks for pointing this out as I for one have been fighting a
> similar
> > situation with my Entropy. I've rechecked all my measurements and servo
> > connections but never thought this might be a problem.
> > BTW, the bearing change on my OS 140RX went smooth as a whissle using
the
> > instructions on your web page.
> >
> > Mike
> >   ----- Original Message ----- 
Klipped for reposting...   dkr


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.