ceramic bearing

[Wayne Galligan]

THANKS GUYS

WG

----- Original Message ----- 
From: "David Lockhart" <DaveL322 at comcast.net>
To: <discussion at nsrca.org>
Sent: Tuesday, July 06, 2004 11:18 PM
Subject: Re: ceramic bearing


> Wayne,
>
> Don't do it.
>
> The retainer fails in very short order.
>
> Dave
>
> ----- Original Message -----
> From: "Wayne Galligan" <wgalligan at goodsonacura.com>
> To: <discussion at nsrca.org>
> Sent: Tuesday, July 06, 2004 7:56 PM
> Subject: ceramic bearing
>
>
> >       20x37x9 MR6904C-TH9/C3 -39 Ceramic Engine Bearing  $44.95
> >
> >
> > I found this bearing in Boca's list of model engines that would fit the
OS
> > 1.40.   Has anyone used or any experience with this bearing.  I would
> think
> > ceramic is impervious to rust and high temps.
> >
> > Wayne Galligan
> >
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.