Webra 1.45

Del Rykert drykert at localnet.com
Tue Jul 6 15:35:23 AKDT 2004


Personally I hate using a screwdriver as to easy to vibrate off. Ball driver allows more to the rear access and turning keeping precious digits away from whirling digit modifier.
 
    del
  ----- Original Message ----- 
  From: Scott Smith 
  To: discussion at nsrca.org 
  Sent: Monday, June 28, 2004 7:34 PM
  Subject: RE: Webra 1.45


  Here's a thought that may be easier to implement...how about a longer screw driver to get your hand beyond the prop? You can make one from a piece of music wire.  Press a piece of brass tubing onto the needle valve to create a socket. This will hold the long screw driver in place while making the adjustment.

  Scott



    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Wayne Galligan
    Sent: Monday, June 28, 2004 6:36 PM
    To: discussion at nsrca.org
    Subject: Re: Webra 1.45


    You can accomplish the same thing by using a 2-56 socket head screw.  To make it fit in the needle assembly, like in my OS, chuck the head of the screw in your drill a spin it up then use your Dremel with a sanding drum and grind it down to the size you need. Use what ever length screw suits the setup.

    Wayne G. 
      ----- Original Message ----- 
      From: Del Rykert 
      To: discussion at nsrca.org 
      Sent: Monday, June 28, 2004 5:27 PM
      Subject: Re: Webra 1.45


      How about brazing the cutoff head of allen bolt to head of needle then adjust with ball driver which allows more prop clearance if you don't want to go with remote needle.

          del

        ----- Original Message ----- 
        From: David Wartel 
        To: discussion at nsrca.org 
        Sent: Tuesday, June 22, 2004 11:12 PM
        Subject: Webra 1.45


        Is there a replacemnet needle valve available for this engine that has a provision for an extension? The stem is short and only has a slot for adjusting with a screwdriver. Being so close the the prop, this is a little hazardous with a cowled engine.

        Alternatively, is there a simple way to add an extension to the needle?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040706/4fc9f79f/attachment.html


More information about the NSRCA-discussion mailing list