PL Prod Lazulite CG

[Rcmaster199 at aol.com]

In a message dated 1/28/2004 11:55:57 AM Eastern Standard Time, 
James.Woodward2 at edwards.af.mil writes:


> Subj:PL Prod Lazulite CG 
> Date:1/28/2004 11:55:57 AM Eastern Standard Time
> From:James.Woodward2 at edwards.af.mil
> Reply-to:discussion at nsrca.org
> To:discussion at nsrca.org
> Sent from the Internet 
> 
> 
> 
> Hi All,
> 
> If someone knows the CG location of the PL Prod Lazulite, I would like to 
> know it.  I tried to use a translator to decipher the instruction set.  
> However, if I'm correct, the French word for "wing-tube" (Cle') is translated to 
> English as "Key."  Thus, the CG would be 20 mm aft of the "Axis of the Key."  
> The other CG reference seems to be from the wing Leading Edge as 190 MM.  
> However, the translation is "behind attack edge."  Either way, the 20 mm behind 
> the center of the wing tube, or 190 from the LE of the wing seam to be close 
> (due to sanding, they do differ a little with the 20 mm measurement resulting 
> in a slightly more aft CG location.).
> 
>  
> 
> Of course, a simple diagram with any of these numbers would have solved the 
> problem.  However, the only reference to "centre de gravite" is on a picture 
> (taken from an angle) showing the stab/wing aligned with masking tape from 
> the stab tips to the wing tips.  There are no "CG" mark locations on any of the 
> photos.  *Note:  "centre de gravite" translates directly to "center of 
> seriousness."
> 
>  
> 
> Thanks!!
> 
> Jim W.
> 
> 
> 

As in "gravity of the situation". That's funny stuff Jimbo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040128/c551ecbf/attachment.html