OS 1.60 FX props

[Dean Pappas]

Hello Xavier,
At 9.7 lbs I would try the stock 15.75 X 13 three-blader, first. You could reduce the pitch to a 12, if your engine prefers a lighter load. I don't think this will be the case with the 160: you should be able to get the 13-pitch to comfortably turn in the 7,600 RPM area.
Dean P.

	-----Original Message----- 
	From: Xavier Mouraux [mailto:xavier.mouraux at sympatico.ca] 
	Sent: Fri 1/23/2004 7:44 PM 
	To: discussion at nsrca.org 
	Cc: 
	Subject: OS 1.60 FX props
	
	
	What 3 blades prop would work on that motor ?
	I am looking at installing a 160FX in my Hydeout but the ground clearance maybe a problem. The plane would be around 9.7lbs.
	Is there a landing gear that would replace the Bolly but with longer legs ?
	 
	Thanks
	 
	Xavier

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4146 bytes
Desc: not available
Url : http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040125/6866da04/attachment.bin