MK ball bearing connectors

[EHaury at aol.com]

Be careful when installing the MK BB end on to the servo arm. The bearing is 
snapped in from one side (and can come out the same way) which is open, the 
other side is flanged. Place the flanged side toward the servo arm so that 
there's no possibility of the plastic portion removing itself from the bearing and 
disconnecting the linkage.

Earl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040121/70f59d91/attachment.html