Question converting from JR 8103 to 10X

[Xavier Mouraux]

I had something similar happening when I tried to use the 8103 in body box with my Alliance and the 10SXII. I think it was only the ailerons but I am not sure. There was not enough throws when I give the control to the 8103. I will have to try it again and found the solution.

Xavier



  ----- Original Message ----- 
  From: Keith Black 
  To: discussion at nsrca.org 
  Sent: Thursday, January 15, 2004 7:45 PM
  Subject: Question converting from JR 8103 to 10X


  For Christmas I bought (uh, I mean my wife got me), a JR 10X and I'm in the process of transferring the settings from my 8103. I went through each and every menu item in the 8103 and made sure that each setting was programmed into the 10X. When testing it on the plane everything appeared perfect except for the aileron throws are significantly greater using the 10X than the 8103. I've gone over every possibility I can think of (throws, dual rates, expo, mixes) and I can't find any reason that I would be different.

  Is it possible that the same dual rate percentage on the 8103 and the 10X may yield significantly different throws on the ailerons but not on other control surfaces?

  Thanks,
  Keith Black
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040115/fe43a90d/attachment.html