Hydeaway measurements

[Anthony Romano]

Hi Nik,
I have the Hyde Away Troy flew last year. The elevators are 900mm from the 
front of the hinge line to the TE and taper to 950mm at the widest point. 
They are notched 5cm at the root to allow for rudder clearance. Hope that 
helps.

Anthony


>From: "Nik Middleton" <middlen4 at btinternet.com>
>Reply-To: discussion at nsrca.org
>To: <discussion at nsrca.org>
>Subject: Hydeaway measurements
>Date: Mon, 5 Jan 2004 09:39:48 -0000
>
>Well I've finally got my workshop pretty much completed since my house move
>and it's time to finish my Hydeaway project.
>
>The only major remaining piece of work is to fit the stab.  Does anyone 
>know
>the correct position?  I understand that in later versions the stab was
>raised, but I have no documentation.  Also, could someone measure the stab
>for me?  The version I've got only came with the foam cores and I don't 
>have
>any info on where to cut the elevators.
>
>Measurements from the root and tip  to the hinge line would be most
>appreciated.  Also the length of the elevator trailing edge from tip to the
>point where it cuts in towards the root to allow for the rudder movement.
>
>rgds
>

_________________________________________________________________
Tired of slow downloads? Compare online deals from your local high-speed 
providers now.  https://broadband.msn.com

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#