receiver antenna placement

[Ron Van Putte]

On Feb 23, 2004, at 5:50 PM, Rcmaster199 at aol.com wrote:

> Jon you would be fine with the set-up you want to use. What I use is 
> stirrer straw material from the local coffee shop, at around 1/8" OD. 
> I place about 5 straws on a rod, end to end, and tape the joints. Then 
> I route the straw in a convenient location. The important thing to 
> remember is the feeding of the antenna when you are installing the 
> radio.

Geez!  I never knew you had to feed an antenna!  What do you feed it?

Ron Van Putte

> Subj:receiver antenna placement
>  Date:2/23/2004 1:24:40 AM Eastern Standard Time
>  From:wise at alaskalife.net
>  Reply-to:discussion at nsrca.org
>  To:discussion at nsrca.org
> Sent from the Internet
>
>
>
>  Hi all, What is the best way to run the receiver antenna on a 
> composite
>  fuse pattern plane? I am building a Temptation, I`m thinking of 
> putting
>  the antenna in a tube inside the fuse. Will this work or will it 
> create
>  radio reception problems? Any other ideas? Thanks Jon Wise
>  Anchorage, Alaska
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 2036 bytes
Desc: not available
Url : http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040223/9d6e489c/attachment.bin