Digital / standare Servo question (HITEC)

[Scott Smith]

Message3-D Flyer did one (which may be where the measured centering errors
are coming from.)

"The Hitec HS 5945 Digital Ultra servo was found to use the least amount of
current from the onboard battery pack with a no load current draw of 4 mAh
and a maximum load current of 1.6 A"

JR and Futaba recorded 16 mAh no load...that's significant * 4 servos.

As for the centering, they made an error and retracted the prior centering
results.  Their corrected findings stated centering deviation was +/-0.5
degrees.

Personally, I have had good luck with the 5925's and 45's

  -----Original Message-----
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On
Behalf Of Keith Hoard
  Sent: Monday, December 06, 2004 6:41 PM
  To: discussion at nsrca.org
  Subject: Digital / standare Servo question (HITEC)




  Has anyone done a "Consumer Reports" type comparison of all the different
brands / models of pattern servos?







  Keith L. Hoard

  Cordova, TN

  khoard at midsouth.rr.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041207/095824d5/attachment.html