YS-160 dim

[Troy A. Newman]

Hey Jas,

4.5" will clear the top of the valve cover from Shaft CL.

TN
----- Original Message ----- 
From: "Jason" <jasonshulman at cox.net>
To: "NSRCA" <discussion at nsrca.org>
Sent: Saturday, December 04, 2004 6:38 PM
Subject: YS-160 dim


> Hi All,
>
> Thanks for all the suggestions on canopy mounting. I've got some things to
> go on.
>
> Now, I was wondering what the dimension on the YS-160 from the centerline
of
> the motor to the top of the valve cover is?
>
> Thanks again,
> Jason
> www.jasonshulman.com
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.