information about thunder tiger 120 rx

[francisco gonzalez]

hi Todd !
Thanks to share the information , i have one os max
1.40 rx ( excellent engine) , but i see the thunder
tiger and i thinking if this will be good engine, but i
see is not the better way for my pattern planes , i
will keep with the os engines
thanks for your help
francisco






On Fri, 3 Dec 2004 19:51:10 -0600, "Todd Schmidt" wrote:

> 
> Francisco,
> 
> I tried one a few years back with limited success. 
> When it ran it was very
> strong, but unfortunately different day, different
run.
> The pump seemed to
> have problems and needs to be cleaned after every
> flight session per TT
> instructions. Also the header and pipe that comes with
> the engine is very
> heavy at 11 or 12 ounces total.  The bearings went
real
> fast and had to be
> replaced too.  It didn't take to long before I went
> back to YS..
> 
> Todd Schmidt
> ----- Original Message -----
> From: "francisco gonzalez" <proesco at decoarq.com>
> To: <discussion at nsrca.org>
> Sent: Friday, December 03, 2004 2:41 PM
> Subject: information about thunder tiger 120 rx
> 
> 
> 
> is there someone experience about 120 thunder tiger rx
> ??
> francisco
> 
> 
> 
> ================To access the email archives for this
> list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.