Mueller header question

[rcaerobob at cox.net]

There's always ONE <G>....
Easy. The motor is on a really GOOD soft mount, and then you mount the PIPE on this hard pedestal, cinch down the tie wrap REALLY tight, and of course, mount in such a way that it will not move side to side OR front/back...make a few flights - BOING - header break.
Guaranteed.
Repeatable.
Not restricted to brand of motor/coupler/header/or pipe.
Try it!
(not)

Bob
> 
> From: randy10926 at comcast.net
> Date: 2004/12/03 Fri PM 04:53:43 EST
> To: discussion at nsrca.org
> Subject: Re: Re: Mueller header question
> 
> OK, I will bite.  How do you know?
> Randy
> 
> -------------- Original message -------------- 
> 
> > The only one I broke was the one I tried to 'bend', stupidly. Of course, if you 
> > mount the pipe so that it is NOT moving in synch with the motor, you gonna break 
> > ANYBODY's header!!! (You MAY ask how I know... ) 
> > > 
> > > From: "Wayne Galligan" 
> > > Date: 2004/12/03 Fri AM 10:53:00 EST 
> > > To: 
> > > Subject: Re: Mueller header question 
> > > 
> > > MessageKarls headers are very durable. Breakage can occur and from what I 
> > have experienced is usually due to the way it is setup or touching something to 
> > fatigue it. 
> > > 
> > > I have one that survived a hard crash and needed to be straightened but is 
> > still being used. 
> > > 
> > > WG 
> > > ----- Original Message ----- 
> > > From: Fletcher, Richard 
> > > To: 'discussion at nsrca.org' 
> > > Sent: Friday, December 03, 2004 9:42 AM 
> > > Subject: Mueller header question 
> > > 
> > > 
> > > Has anyone broken one of his OS 160 versions? I have only one and if it is 
> > possible that it will break due to fatigue I will order a backup. I recall that 
> > Mac's headers would break from time to time. 
> > > 
> > > 
> > > 
> > > Thanks, Rich 
> > > 
> > 
> > Bob Pastorello, El Reno, OK, USA 
> > rcaerobob at cox.net 
> > www.rcaerobats.net 
> > 
> > ================================================= 
> > To access the email archives for this list, go to 
> > http://lists.f3a.us/pipermail/nsrca-discussion/ 
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm 
> > and follow the instructions. 
> > 
> 

Bob Pastorello, El Reno, OK, USA
rcaerobob at cox.net
www.rcaerobats.net

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.