150cc engine header question

[Fletcher, Richard]

Hi Bill, 

    Thanks very much.



Rich

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Bill Krueger
Sent: Friday, August 27, 2004 11:24 AM
To: discussion at nsrca.org; mini-iac at yahoogroups.com
Cc: discussion at nsrca.org
Subject: Re: 150cc engine header question


A proper welding job will be plenty strong.

flierbk
----- Original Message ----- 
From: "Fletcher, Richard" <Richard.Fletcher at gs.com>
To: <mini-iac at yahoogroups.com>
Cc: <discussion at nsrca.org>
Sent: Friday, August 27, 2004 9:31 AM
Subject: 150cc engine header question


> Guys,
>
>     I have a brand new set of aluminum headers for my 3W 150 that I do 
> not need. A buddy has a DA 150 and could use them but the flanges must 
> be cut off and welded back on at the proper angle since the DA flanges 
> are 90 degrees to the header pipes and the 3W's flanges are at 
> something like a
45
> degree angle. If the flanges are cut off and helix arced back on will 
> the headers have enough strength, or will they not last and break? 
> Also, if anyone on the list does heli arc welding or knows where I can 
> send, them please let me know.
>
>
>
> Thanks, Rich
> =====================================
> # To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.