I/O diamond 8

Bob Pastorello rcaerobob at cox.net
Thu Aug 26 18:37:36 AKDT 2004


Here's the pdf rule submittal sent to AMA; copied from Tony's site when the
proposals were submitted.  The descriptions are there....
http://www.rcaerobats.net/downloads/2005Masters.pdf

Bob Pastorello
rcaerobob at cox.net
www.rcaerobats.net


----- Original Message ----- 
From: <jivey61 at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Thursday, August 26, 2004 9:20 PM
Subject: Re: Re: I/O diamond 8


> Bob
>  I am getting my info from Eric's column in MA (Oct) page 121.
>
>  Jim Ivey
> >
> > From: "Bob Pastorello" <rcaerobob at cox.net>
> > Date: 2004/08/26 Thu PM 09:44:24 EDT
> > To: <discussion at nsrca.org>
> > Subject: Re: I/O diamond 8
> >
> > I don't think so....I put a drawing of that on my site...it seems you
fly
> > past center, then pull to the 1st up 45* line....sort of like a regular
> > cuban 8.
> >
> > I think.
> >
> > Bob Pastorello
> > rcaerobob at cox.net
> > www.rcaerobats.net
> >
> >
> > ----- Original Message ----- 
> > From: <jivey61 at bellsouth.net>
> > To: <discussion at nsrca.org>
> > Sent: Thursday, August 26, 2004 8:39 PM
> > Subject: I/O diamond 8
> >
> >
> > > Guys help!!
> > > Am I to assume that the inside/outside diamond 8 is offset to the
right of
> > center when flying right to left. In other words I read it as the first
> > diamond starts on center then the second diamond is to the right of the
> > first diamond. Then the manouver is not centered.
> > >
> > > TIA
> > > JIM IVEY
> > >
> > > =====================================
> > > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > > and follow the instructions.
> > >
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



More information about the NSRCA-discussion mailing list