NMP 7.4v 2Amp Battery Packs

[Adam Glatt]

Dieter Rozek wrote:

> I just purchase these battery packs and according to the included 
> instructions is mentions to "Only use NMP's Lithium charger to charge 
> these packs."  I was wondering if anyone might know why this would be 
> the case.  Shouldn't any Li battery charger work?  I already have a 
> Kokam Li battery charger which allows me to charge at various rates.  
> Is there a legitimate reason why I should buy their charger or should 
> any Li charger work?  Also, I was surprised at the diminutive size of 
> the pack.  Does this pack have enough juice to power 3x JR9411, 1x3412 
> and 1x8411 in a Temptation?  At 2A I would assume that this would be 
> more than plenty?  I would be interested in hearing anyone's 
> experience with these packs.
>
> Thanks
>
> DIeter
>
> =====================================
> # To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
I'm estimating our peak draw with a fully digital plane is around 1amp, 
so any lithium battery over 250mah shouldn't have a problem staying 
above 6.0v during those draws.
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.